OEM / ODM Manufacturing
VT-FL48-100T220 Series — 6kW Industrial Forklift Battery Charger, 48V 100A (3-Phase 220V)
Industrial-grade design engineered for reliable, long-term performance — supplied through qualified manufacturing with OEM / ODM customization, export-ready packaging and worldwide delivery.
Custom VoltageCustom Charging ProfileOEM & ODMWaterproof OptionsCommunication OptionsCertifications
Talk to our engineering team for OEM / ODM projects and volume pricing.

48V 100A industrial forklift battery charger for three-phase 220V supplies. 6 kW, CAN communication, >94% efficiency, IP21, 32-60 VDC. Air-cooled, OEM/ODM builds with a 2-year warranty.
Key Specifications
| Model | VT-FL48-100T220 |
|---|---|
| Output Volt | 48V |
| Output Current | 100A |
| Input Volt | 380VAC 3-Phase |
| Rated Out Power | 6000W |
| Dimensions (mm) | 435*192*380mm |
| IP Rating | IP21 |
| Network | CAN |
| Battery Type | Lithium |
| Warranty | 2-year |
Built for These Applications
Tell us the application and we match the charging profile, interface and enclosure to it.
Battery Brands
Charging platforms for your own label and voltage range.
Golf Carts
Fleet and OEM charging, configured to your battery and application.
RV & Marine
Waterproof and ignition-safe charging for mobile installations.
Industrial Vehicles
Forklift, AGV and floor-machine duty cycles.
Telecom & Backup
Rectifier and battery-bank charging for site power.
Solar & Off-grid
Charging from renewable and generator sources.
Configure It Around Your Battery
OEM / ODM customization is available on this platform. Send your battery specification and we propose the configuration.
Charging Profile
Voltage, current and CC/CV stages set to your pack.
Connector
Connector type and pin-out to your existing harness.
Cable & Length
Cable gauge and length for your installation.
Branding
Custom Branding on label, housing and packaging.
Packaging
Retail or export-ready packaging and inserts.
Charging Compatibility
Charging voltage is set per chemistry. The exact chemistry and voltage range of this model are listed in Key Specifications above.
| Battery chemistry | Typical charging voltage | Notes |
|---|---|---|
| LiFePO4 | 3.5 – 3.65 V per cell | CC / CV, balance-friendly |
| Lithium (Li-ion) | 4.1 – 4.2 V per cell | CC / CV with charge termination |
| Lead-Acid / AGM / GEL | 2.40 – 2.45 V per cell | Multi-stage with float |
| Flooded | 2.40 – 2.50 V per cell | Equalization available |
Protection & Reliability
The protection set fitted to this model is listed in Key Specifications above. Reliability of the platform is covered by the items below.
Electrical Protection
Reverse connection, short circuit and no-load protection with automatic shutdown.
Thermal Protection
Over-temperature sensing with derated or stopped charging.
Environmental
Enclosure and conformal treatment options for outdoor and mobile use.
Production Testing
Unit-level functional and safety testing before shipment.
Quality System
ISO 9001 quality system with traceable production records.
Warranty
Standard warranty with defined service terms for OEM programs.
6 kW charger for 48V forklift fleets
The VT-FL48-100T220 is a 6 kW charger for 48V forklift packs on three-phase 220V supplies, adjustable across 32-60 VDC and up to 100 A. It suits sites wired for 3-phase 208-240V rather than 380-480V, with the same control behaviour as the rest of the range: constant-current charging up to the limit, then constant-voltage topping, with live status on the front LCD.
Full specifications
| Input supply | AC 220V 3-phase, 4-wire (L1 / L2 / L3 / PE) |
|---|---|
| Input range | 170-260 VAC |
| Input current | 16.7 A |
| Input power | 6.3 kVA |
| Input connection | 3 m standard; 4P25A industrial plug standard (socket not included, not fitted by default) |
| Frequency | 45-65 Hz |
| Power factor | > 0.99 at full load |
| THD | < 5% at full load |
| Output voltage range | 32-60 VDC |
| Output current range | 1-100 A |
| Efficiency | > 94% |
| Voltage regulation | ±0.5% |
| Current regulation | ±1% |
| BMS supply | DC 12V / 24V |
| Display | LCD: voltage, current, charging time, fault code |
| Cooling | Air cooled |
| Operating temperature | -25 °C to 50 °C |
| Max altitude | 2500 m |
| Output cable | 35 mm², 3 m standard (connector to your specification) |
| Weight | 16.5 kg (net) |
| Packing size | 530 x 300 x 400 mm |
Protection
- Output over-voltage
- Input over-voltage, under-voltage and phase loss
- Power module over-temperature
- Module communication failure
- Battery connection fault
- BMS fault
- Module fan failure
OEM / ODM
Output voltage, current limit, connector type and branding can be built to your specification. Send your battery pack voltage, capacity and connector and we will confirm the matching configuration and sample lead time.
Available Models & Full Specifications
B2B FAQ
Do you support BMS communication on your chargers?
Yes. Where the model supports it, the charger can communicate with the battery BMS over CAN or RS485 so charging stops at the values your BMS expects. The interface fitted to this model is listed in Key Specifications.
Can the charging curve be adjusted to our battery?
Yes. Charging voltage, current and the CC/CV stages can be set to your pack specification as part of an OEM / ODM order. Send your battery datasheet and we confirm the profile.
Can you supply the connector we already use?
Yes. We can fit your existing connector type and pin-out, or supply a matched connector and cable assembly.
Do you offer Custom Branding?
Yes. Custom Branding is available on the product label, housing and packaging for OEM and ODM programs.
How does sample development work?
Send your specification and target quantity. We confirm the configuration, provide a sample lead time and quote, then move to production once the sample is approved.
Send Us Your Battery Specification
Share your application, technical requirements and expected quantity — our B2B team will recommend the right product or customized solution.
