OEM / ODM Manufacturing
QA1200D Series — 1200W Sealed Battery Charger, 24V-84V
Industrial-grade design engineered for reliable, long-term performance — supplied through qualified manufacturing with OEM / ODM customization, export-ready packaging and worldwide delivery.
Custom VoltageCustom Charging ProfileOEM & ODMWaterproof OptionsCommunication OptionsCertifications
Talk to our engineering team for OEM / ODM projects and volume pricing.

1200W sealed charger (VT-QA1200D) in a die-cast IP65 case, ≥93.0% efficiency, covering 24V-84V packs from a 100-240VAC, 45-65Hz supply.
- 6 models, 24V-84V — 12A, 15A, 20A, 25A, 30A output current
- IP65 — sealed die-cast case, potted fan
- Lead-acid, Li-ion and LiFePO4 support · 2-year warranty
Key Specifications
| Model | QA1200D |
|---|---|
| Battery Voltage | 24V, 36V, 48V, 60V, 72V, 84V |
| Rated Out Power | 1200W |
| Input Volt | 110VAC, 220VAC |
| IP Rating | IP65 |
| Dimensions (mm) | 281.8*123.2*74.3mm |
| Weight ( N.W ) | 2.5kg |
| Battery Type | Lead Acid, LiFePO4, Li-ion |
Built for These Applications
Tell us the application and we match the charging profile, interface and enclosure to it.
Battery Brands
Charging platforms for your own label and voltage range.
Golf Carts
Fleet and OEM charging, configured to your battery and application.
RV & Marine
Waterproof and ignition-safe charging for mobile installations.
Industrial Vehicles
Forklift, AGV and floor-machine duty cycles.
Telecom & Backup
Rectifier and battery-bank charging for site power.
Solar & Off-grid
Charging from renewable and generator sources.
Configure It Around Your Battery
OEM / ODM customization is available on this platform. Send your battery specification and we propose the configuration.
Charging Profile
Voltage, current and CC/CV stages set to your pack.
Connector
Connector type and pin-out to your existing harness.
Cable & Length
Cable gauge and length for your installation.
Branding
Custom Branding on label, housing and packaging.
Packaging
Retail or export-ready packaging and inserts.
Charging Compatibility
Charging voltage is set per chemistry. The exact chemistry and voltage range of this model are listed in Key Specifications above.
| Battery chemistry | Typical charging voltage | Notes |
|---|---|---|
| LiFePO4 | 3.5 – 3.65 V per cell | CC / CV, balance-friendly |
| Lithium (Li-ion) | 4.1 – 4.2 V per cell | CC / CV with charge termination |
| Lead-Acid / AGM / GEL | 2.40 – 2.45 V per cell | Multi-stage with float |
| Flooded | 2.40 – 2.50 V per cell | Equalization available |
Protection & Reliability
The protection set fitted to this model is listed in Key Specifications above. Reliability of the platform is covered by the items below.
Electrical Protection
Reverse connection, short circuit and no-load protection with automatic shutdown.
Thermal Protection
Over-temperature sensing with derated or stopped charging.
Environmental
Enclosure and conformal treatment options for outdoor and mobile use.
Production Testing
Unit-level functional and safety testing before shipment.
Quality System
ISO 9001 quality system with traceable production records.
Warranty
Standard warranty with defined service terms for OEM programs.
QA1200D — 1200W sealed battery charger
The VT-QA1200D is a 1200W sealed charger for 24V to 84V packs. It adds a charging interlock system to the CAN bus interface, so the vehicle can lock out drive while the charger is connected and the charger can report completion before the interlock releases. Efficiency is 93% or better at 0.99 power factor.
Key Features
- 1200W output — 6 models from 24V to 84V.
- IP65 sealed case — die-cast aluminium, potted cooling fan, built for wet, hot, cold and high-altitude sites.
- Universal supply — 100-240VAC, 45-65Hz.
- ≥93.0% efficiency, 99% power factor.
- Triple colour charge indicator.
- Charging interlock system.
- CAN BUS interface with auxiliary power.
- Five hardware protection functions — burnout, reverse connection, no-load, short circuit and automatic shutdown at full charge.
- OEM / ODM ready — custom voltage, charging profile, connector, branding and export packaging.
Specifications
| Model | VT-QA1200D |
|---|---|
| Rated output power | 1200W |
| AC input voltage | 100-240VAC, 45-65Hz |
| AC input current (max) | 5.5A@220VAC |
| Battery voltage range | 24V / 36V / 48V / 60V / 72V / 84V |
| Charging mode | CC / CV with automatic cut-off at the CV cut-off current |
| Efficiency | ≥93.0% |
| Power factor | ≥0.99 |
| Noise | ≤45dB |
| Protection level | IP65 |
| Dimensions (L x W x H) | 281.8 x 123.2 x 74.3 mm |
| Net weight | 2.5kg |
| Operating temperature | -30°C to 65°C |
| Storage temperature | -40°C to 95°C |
Models and Output Current
| Model | Battery pack / output range | Max current @220V | Max current @120V |
|---|---|---|---|
| QA1200D-24V30A | 24V (24-34V) | 30A | 30A |
| QA1200D-36V30A | 36V (30-44V) | 30A | 25A |
| QA1200D-48V25A | 48V (39-60V) | 25A | 22A |
| QA1200D-60V20A | 60V (48-73V) | 20A | 18A |
| QA1200D-72V15A | 72V (60-88V) | 15A | 15A |
| QA1200D-84V12A | 84V (72-103V) | 12A | 12A |
Constant-Voltage Set-points by Chemistry
| Model | CV set-point: lead acid / Li-ion / LiFePO4 | CV cut-off |
|---|---|---|
| QA1200D-24V30A | 29.4V / 29.4V / 29.2V | 3.0A |
| QA1200D-36V30A | 44.1V / 42.0V / 43.8V | 3.0A |
| QA1200D-48V25A | 58.8V / 54.6V / 58.4V | 3.0A |
| QA1200D-60V20A | 73.5V / 67.2V / 73.0V | 2.0A |
| QA1200D-72V15A | 88.2V / 84.0V / 84.0V | 1.5A |
| QA1200D-84V12A | 103V / 105V / 103V | 1.5A |
Lead-acid (flooded and sealed), Li-ion and LiFePO4 packs are supported; the CV set-point differs by chemistry and is listed per model below.
Protection Functions
- Burnout protection — Output power is reduced when the charger temperature exceeds its limit; charging stops and the unit switches to standby above 65°C ambient until the temperature falls.
- Reverse connection protection — The charger and battery are shut down if the battery is connected in reverse, without damaging the charger.
- No-load protection — No output when no battery is connected.
- Short circuit protection — The charger shuts down on an output short circuit and resumes only after the fault is cleared and the charger restarted.
- Automatic shutdown when fully charged — Charging switches off once the battery is judged full.
Typical Applications
- Electric bumper cars and amusement vehicles
- Walk-behind mowers
- Forklifts and warehouse trucks
- Floor scrubbers and sweepers
- AGVs and AMRs
- Ships and workboats
- Aerial work platforms
- Electric watercraft
- Golf carts and low-speed vehicles
Documents
QA1200D datasheet (PDF) — full model table, charging curves and protection details.
OEM / ODM & Warranty
Custom voltage, charging profile, connector, cable length, labelling and export packaging are supported through qualified manufacturing resources. Fast sample support is available. Every unit carries a 2-year warranty.
Available Models & Full Specifications
B2B FAQ
Do you support BMS communication on your chargers?
Yes. Where the model supports it, the charger can communicate with the battery BMS over CAN or RS485 so charging stops at the values your BMS expects. The interface fitted to this model is listed in Key Specifications.
Can the charging curve be adjusted to our battery?
Yes. Charging voltage, current and the CC/CV stages can be set to your pack specification as part of an OEM / ODM order. Send your battery datasheet and we confirm the profile.
Can you supply the connector we already use?
Yes. We can fit your existing connector type and pin-out, or supply a matched connector and cable assembly.
Do you offer Custom Branding?
Yes. Custom Branding is available on the product label, housing and packaging for OEM and ODM programs.
How does sample development work?
Send your specification and target quantity. We confirm the configuration, provide a sample lead time and quote, then move to production once the sample is approved.
Send Us Your Battery Specification
Share your application, technical requirements and expected quantity — our B2B team will recommend the right product or customized solution.

