OEM / ODM Manufacturing

100 × 113 × 35 mm Step-Up DC-DC Converter — 12V to 48V, 10A

Industrial-grade design engineered for reliable, long-term performance — supplied through qualified manufacturing with OEM / ODM customization, export-ready packaging and worldwide delivery.

Custom VoltageCustom Output ProfileOEM & ODMWaterproof OptionsCommunication OptionsCertifications

Talk to our engineering team for OEM / ODM projects and volume pricing.

VOITA 100 × 113 × 35 mm sealed aluminium DC-DC converter case

Slim step-up (boost) DC-DC converter in one finned case: 100 × 113 × 35 mm, 0.5–0.6 kg, IP67.
Input: DC 12 V (9-16 V)
Output: 48 V, ± 0.25 V
Current: 10 A | Power: 480 W
Terminals: screw block with blade-fuse holder · CE / FCC / RoHS
Built to order with custom set-points and custom branding.

Key Specifications

Key parameters for this model. Values are maintained per product and update automatically.

Model

VT-DC-1248480

Input Volt

DC12V (9V-16V)

Output Volt

48V

Dimensions (mm)

100*113*35mm

Weight ( N.W )

0.5-0.6kg

Rated Out Power

480W

IP Rating

IP67

Protections

Over-current Protection, Overheating Protection

Built for These Applications

Tell us the application and we match the input range, output profile, interface and enclosure to it.

Battery Brands

OEM voltage-conversion platforms for your own label and range.

Vehicle & Marine

12V / 24V step-up and step-down conversion for mobile and marine installations.

Telecom & Backup

48V to 12V conversion for rack and site power.

Industrial Vehicles

24V / 12V control, pump and accessory loads.

Base Stations & Remote Sites

48V / 72V accessory and lighting conversion.

Solar & Off-grid

Regulated DC output for remote and off-grid loads.

Configure It Around Your System

OEM / ODM customization is available on this platform. Send your input and output requirement and we propose the configuration.

Input & Output Range

Voltage windows and current rating set to your system.

Regulation & Tolerance

Output tolerance and ripple set to your load.

Connector & Termination

Connector, terminal or cable assembly to your harness.

Branding

Custom Branding on label, housing and packaging.

Packaging

Retail or export-ready packaging and inserts.

Output & Load Compatibility

Output behaviour is set per model. The exact input range, output tolerance and protection set are listed in Key Specifications above.

ParameterTypical valueNotes
Input rangePer model — see Key Specifications above.Regulated across the full input window.
Output tolerancePer model — see Key Specifications above.Adjustable or fixed, depending on model.
Load typesResistive, capacitive and inductive loadsCheck inrush for motor and pump loads.
Protection responseOverload, short circuit and reverse connectionOutput shutdown with automatic recovery.

Protection & Reliability

The protection set fitted to this model is listed in Key Specifications above. Reliability of the platform is covered by the items below.

Electrical Protection

Reverse connection, short circuit and no-load protection with automatic shutdown.

Thermal Protection

Over-temperature sensing with output derating or shutdown.

Environmental

Enclosure and conformal treatment options for outdoor and mobile use.

Production Testing

Unit-level functional and safety testing before shipment.

Quality System

ISO 9001 quality system with traceable production records.

Warranty

Standard warranty with defined service terms for OEM programs.

Slim Case for 48 V Loads

This step-up (boost) DC-DC converter is built for one job — 12 V DC in, 48 V DC out at 10 A (480 W) — in a slim finned case measuring 100 × 113 × 35 mm, net weight 0.5–0.6 kg, sealed to IP67. The low profile suits enclosures and panels where a tall block will not fit. Connections are made on a screw terminal block with an in-line blade-fuse holder. The rating is fixed at manufacture; tell us the input, the output and the current you need and we build to that rating.

Model Built in This Case

ModelInput versionOutput currentOutput power
12V‑48V12 V (9–16 V)10 A480 W

Ordering model = voltage pair + current rating, that is 12V-48V 10A. Output power is the rated output voltage multiplied by the output current. Our source table annotates this casing build as “10 A (10–60 V)” — ask us to confirm the exact input/output window for your application. Other voltage pairs of the same series are built in the 66 × 58 × 23 mm, 74 × 74 × 32 mm and 100 × 80 × 38 mm cases.

Electrical Specification

Input voltageDC 12 V (9–16 V)
Output voltage48 V, held to ± 0.25 V
Output current10 A
Output power480 W
Transfer efficiency90 % typical at rated load
ProtectionOver-current and over-heating protection, cut-off at 150 °C
Working temperature−20 °C to 85 °C
Ingress protectionIP67 — dust-tight, immersion to 1 m for 30 minutes
CertificationCE, FCC, RoHS
Warranty2 years standard, extendable by agreement

Ripple and noise, no-load input current and MTBF are not published for this case size — ask us and we will confirm them for your build.

Mechanical and Mounting Data

Case size (mm)100 × 113 × 35
Net weight0.5–0.6 kg
HousingSlim finned aluminium extrusion, sealed
TerminalsScrew terminal block with an in-line blade-fuse holder
Dimensional drawingAvailable on request

Documents

Step-up DC-DC converter datasheet — 100 × 113 × 35 mm case (PDF) — one page: model table, electrical data, mechanical data and ordering note.

Related Models by Voltage Pair

Ordering and Customization

Custom set-points, connector arrangements and custom branding are available on this platform. Send the input range, output voltage, output current, terminal or connector preference and the quantity you need — we will quote a customized build. Fast sample support for evaluation units; lead time depends on the configuration.

FAQ

Q: Is the output voltage adjustable after delivery?
A: No. The voltage pair and the current rating are fixed when the unit is built, so choose the model you need. Custom set-points can be built to order.

Q: What does the “10–60 V” note in your table mean?
A: That is how this casing build is annotated in our own product table. Rather than guess at your load, send us the input voltage, the output voltage and the current you need and we confirm the exact window before quoting.

Q: How is it connected?
A: Through the screw terminal block on the case, with an in-line blade-fuse holder on the supply side. Ring or ferrule terminals both work; tell us your cable size and we will confirm the terminal.

Q: Do you supply samples and custom branding?
A: Yes. Sample units for evaluation, custom set-points and custom branding are all available — send your requirement and we will confirm with a sample.

Available Models & Full Specifications

Related Solution

B2B FAQ

Does the input range cover my voltage swing?

For the models listed in Key Specifications above, yes. Give us your minimum and maximum input voltage and we confirm the model that stays in regulation across it.

What output tolerance and ripple can you hold?

Tolerance and ripple are model-specific and listed in Key Specifications above. If your load needs a tighter window, confirm it at order stage and we verify the configuration.

Can it drive inductive loads such as motors or pumps?

Yes, within the model’s rating. Size against inrush current, not running current. Send the load profile and we check the starting-current margin.

Can you supply the connector or cable assembly we already use?

Yes. We can fit your existing connector type and pin-out, or supply a matched connector and cable assembly.

Do you offer Custom Branding and sample development?

Yes. Custom Branding is available on the product label, housing and packaging for OEM and ODM programs. Send your specification and target quantity; we confirm the configuration, sample lead time and quote, then move to production once the sample is approved.

Send Us Your Power Conversion Requirement

Share your application, technical requirements and expected quantity — our B2B team will recommend the right product or customized solution.

Scroll to Top
Contact VoitaTech sales team for inquiry

Tell Us About Your Project

Share your application and expected quantity — our B2B team will recommend a suitable platform or custom build.

Tell us three specs - we will name the model

Contact VoitaTech sales team for inquiry

Let's have a chat

Get a tailored quotation

Contact Information