OEM / ODM Manufacturing
12V–72V to 12V/24V/36V/48V Battery Series — 584W–1160W DC-DC Battery Charger (Up to 80A)
Industrial-grade design engineered for reliable, long-term performance — supplied through qualified manufacturing with OEM / ODM customization, export-ready packaging and worldwide delivery.
Custom VoltageCustom Charging ProfileOEM & ODMWaterproof OptionsCommunication OptionsCertifications
Talk to our engineering team for OEM / ODM projects and volume pricing.

Finned aluminium DC-DC battery charger platform, 220 × 130 × 50 mm. Charges 12V / 24V / 36V / 48V battery banks from a 12V–72V DC source, up to 80A. Charge voltage and profile set to your battery chemistry at manufacture.
Key Specifications
| Input Volt | 12V, 24V, 48V, 60V/72V |
|---|---|
| Output Volt | 13.8V, 14.6V, 28V, 29.2V, 29.4V, 42V, 43.8V, 56V, 58V |
| Dimensions (mm) | 220*130*50mm |
| Weight ( N.W ) | 2.5kg |
| Battery Voltage | 12V, 24V, 36V, 48V |
| Battery Type | Lead Acid, LiFePO4, Li-ion |
Built for These Applications
Tell us the application and we match the charging profile, interface and enclosure to it.
Battery Brands
Charging platforms for your own label and voltage range.
Golf Carts
Fleet and OEM charging, configured to your battery and application.
RV & Marine
Waterproof and ignition-safe charging for mobile installations.
Industrial Vehicles
Forklift, AGV and floor-machine duty cycles.
Telecom & Backup
Rectifier and battery-bank charging for site power.
Solar & Off-grid
Charging from renewable and generator sources.
Configure It Around Your Battery
OEM / ODM customization is available on this platform. Send your battery specification and we propose the configuration.
Charging Profile
Voltage, current and CC/CV stages set to your pack.
Connector
Connector type and pin-out to your existing harness.
Cable & Length
Cable gauge and length for your installation.
Branding
Custom Branding on label, housing and packaging.
Packaging
Retail or export-ready packaging and inserts.
Charging Compatibility
Charging voltage is set per chemistry. The exact chemistry and voltage range of this model are listed in Key Specifications above.
| Battery chemistry | Typical charging voltage | Notes |
|---|---|---|
| LiFePO4 | 3.5 – 3.65 V per cell | CC / CV, balance-friendly |
| Lithium (Li-ion) | 4.1 – 4.2 V per cell | CC / CV with charge termination |
| Lead-Acid / AGM / GEL | 2.40 – 2.45 V per cell | Multi-stage with float |
| Flooded | 2.40 – 2.50 V per cell | Equalization available |
Protection & Reliability
The protection set fitted to this model is listed in Key Specifications above. Reliability of the platform is covered by the items below.
Electrical Protection
Reverse connection, short circuit and no-load protection with automatic shutdown.
Thermal Protection
Over-temperature sensing with derated or stopped charging.
Environmental
Enclosure and conformal treatment options for outdoor and mobile use.
Production Testing
Unit-level functional and safety testing before shipment.
Quality System
ISO 9001 quality system with traceable production records.
Warranty
Standard warranty with defined service terms for OEM programs.
One Case, Many Buildable Charging Ratings
This DC-DC battery charger platform uses a single finned aluminium case measuring 220 × 130 × 50 mm (net weight 2.5 kg). The charge voltage is built to match your battery chemistry — lead-acid, LiFePO4 or Li-ion — so one enclosure covers every rating in the table below.
Buildable Charge Configurations
| Input → Charge Voltage | Charge Current | Battery Bank | Chemistry |
|---|---|---|---|
| 48V → 13.8V | 80A | 12V | Lead acid |
| 60V / 72V → 13.8V | 70A / 80A | 12V | Lead acid (ACC control) |
| 12V → 14.6V | 40A / 50A | 12V | LiFePO4 |
| 12V → 28V | 30A / 40A | 24V | Lead acid (RV & camper) |
| 12V → 29.2V | 20A / 30A | 24V | LiFePO4 |
| 12V → 29.4V | 20A / 30A | 24V | Li-ion |
| 12V → 42V | 20A | 36V | Li-ion |
| 12V → 43.8V | 20A | 36V | LiFePO4 |
| 12V / 24V → 56V | 15A / 20A | 48V | LiFePO4 (RV & camper) |
| 12V / 24V → 58V | 15A / 20A | 48V | LiFePO4 (RV & camper) |
Platform Features
- Finned aluminium heatsink case, 220 × 130 × 50 mm, 2.5 kg
- Charges 12V, 24V, 36V and 48V battery banks from a 12V–72V DC source
- Charge current from 15A to 80A depending on the voltage pair
- Charge voltage matched to lead-acid, LiFePO4 or Li-ion at manufacture
- Multi-stage charging profile with current limiting
- ACC (ignition) control available on selected ratings
Ordering & Customization
Custom branding, custom charge voltage and current setpoints, and custom charge profiles are available on this platform. Fast sample support for evaluation units; lead time depends on platform and customization. Warranty: 2 years.
FAQ
Q: How do I choose the charge voltage?
A: Match the charge voltage to your battery bank — for example 13.8V for 12V lead-acid, 14.6V for 12V LiFePO4, 29.2V for 24V LiFePO4 and 58V for 48V LiFePO4. Tell us your battery and we will confirm the correct setting.
Q: Can it charge from a 60V or 72V system?
A: Yes — 60V / 72V input variants are available on the 13.8V charging ratings.
Q: Do you support custom branding and setpoints?
A: Yes — custom branding, custom charge voltages and custom charging profiles are all available. Send your requirement and we will confirm feasibility with a sample.
Available Models & Full Specifications
B2B FAQ
Do you support BMS communication on your chargers?
Yes. Where the model supports it, the charger can communicate with the battery BMS over CAN or RS485 so charging stops at the values your BMS expects. The interface fitted to this model is listed in Key Specifications.
Can the charging curve be adjusted to our battery?
Yes. Charging voltage, current and the CC/CV stages can be set to your pack specification as part of an OEM / ODM order. Send your battery datasheet and we confirm the profile.
Can you supply the connector we already use?
Yes. We can fit your existing connector type and pin-out, or supply a matched connector and cable assembly.
Do you offer Custom Branding?
Yes. Custom Branding is available on the product label, housing and packaging for OEM and ODM programs.
How does sample development work?
Send your specification and target quantity. We confirm the configuration, provide a sample lead time and quote, then move to production once the sample is approved.
Send Us Your Battery Specification
Share your application, technical requirements and expected quantity — our B2B team will recommend the right product or customized solution.

